Recommendations for roller cam for mild red 308 rebuild

[MR HDT]

Hi there,
My HX Kingswood wagon recently had the worked 308 drop the roller off the Lunati roller lifters and cam which is stamped (889516) on the end.I'm looking to replace it with something similar or the same but the mechanic doing the build believed it wasn't a Crane cam? Can anyone verify that code and if it was a Crane please? the engine was built 7 years ago and probably done less than 10,000kms
The list of what was done to the engine as I bought it was as follows:

Red 308
std pistons
EFI heads, overhauled and cut for twin springs (how do I tell what model?)
Harrop duel plane inlet manifold
Holley 650 spread bore double pumper
Crane hydraulic roller cam (889516)
Crane hyd roller lifters on invoice, but Lunati in engine(Lunati from Crane??)
Crane twin springs, retainers, collets
Crane oil pump drive gear
Yella Terra street Terras roller rockers
1 piece moly pushrods
Powerbond balancer
Electronic ignition
Difillippo extractors


It has a Trimatic trans with a stage 3 shift kit
Ford 9" diff with 3.5 gears

Any thoughts on that cam listing(889516) being 7 years ago?
and I'd like to know if Lunati would have come as a set with cam and wether you can get replacements for the one cylinder as I might use the old cam and lifters for another engine?
Any help on where in South Australia to buy a decent roller cam and lifter set or of eBay that is reputable?

Cheers

[hq308]

APD are the Australian distributors for Crane, They are somewhere in the Adelaide suburbs.

[GtoGeoff]

Are Crane cams still available? Crane was bought by Comp.

[Smitty2]

Are Crane cams still available? Crane was bought by Comp.

.. the speed shops are still selling them .. check outlaw or Engine Master

[MR HDT]

Cheers hq308 and Smitty2