cams. camtech or john marshall cam

[tuffhj]

anyone on here used a camtech cam
or john marshall cam in there Holden v8s.
experiences? reviews?

[RedTaxi]

Plenty of us have used Camtech cams including myself. No issues, did just what they said, then some. One of respected pros on here uses them for all his flat tappet stuff.

[hq308]

Another happy Camtech customer here.

[AED]

Camtech has closed and the machines were bought by Crow I believe.

[46Crab]

Camtech has closed and the machines were bought by Crow I believe.

Crikey... I hadn’t heard that one. Is that hot off the press Rod?

[AED]

Yep, told by Crow yesterday.

[RedTaxi]

Wow, pretty sure Crow have a good rep, yes?

[AED]

I have 14 national records and 5 christmas trees plus heaps of state championships and all have been done with Crow Cams. So I guess you could say they are ok......

[tuffhj]

I've got a crane 286. I'm going to pull
the engine next year and put a gasket
through it. at the same time put a slightly
bigger in it. I still want stay hydraulic flat tappet cam

[46Crab]

I've got a crane 286. I'm going to pull
the engine next year and put a gasket
through it. at the same time put a slightly
bigger in it. I still want stay hydraulic flat tappet cam

Early or VN heads?
Auto or manual?
How much compression has this engine got?
308 or 355 ?

[tuffhj]

vn heads
auto. 3500rpm converter
10.5:1
355

[paul boz]

wow thats a shame about Camtech, i have probably fitted around 150 of their cams with great success

[46Crab]

vn heads
auto. 3500rpm converter
10.5:1
355

That engine is begging for a 280 Crane solid mate.

[tuffhj]

it so is.
I didn't want to spend that much.
I only have bolt down street terra roller rockers

[46Crab]

it so is.
I didn't want to spend that much.
I only have bolt down street terra roller rockers

Seriously, I have a VN headed 355 with a 280 solid that runs bolt down YT Adjustable Street Terra roller rockers.
The Street Terras handle the double Crane springs with no dramas.
I’m guessing you YT roller rockers are non adjustable?