Search:

Hey guys , I’m planning to install dynamat through the cabin of my car. Can it be laid over the factory black sound deadener that’s there ? Or do I have to remove it and lay the dynamat onto the...

Ok, thanks for the explanation. All those number make sense and i think I'm ok to install as is. The previous cam with this stall was good . i have no doubt this will be better!

I might piggy back onto this thread .. I have similar questions about advancing my cam also. I have a 3200 hi stall and will be installing a new solid cam with 238/244 @ 50, 108 lobe seperation with...

I was hoping that would be the case, I appreciate you responding to me. The plan was to change the oil after the bedding process....huge relief!

Morning guys. I'm swapping the cam on my 355 stroker and even after draining the water and now having removed the manifold and heads I've found small amounts of water in the valley around the...

Gday guys, I was wondering what people are using as water pump block offs other than the rubber block offs. I've seen what look like metal block off but does the water pump have to be tapped to...

Hi guys I'm about to change my cam in my 355 VN headed stroker and need to know whether or not the standard rockers will be ok or if i need to upgrade to some rollers. The cam is Clive cam with 232...

G'day guys, next issue to tackle is the brakes on the car. The brakes are soft/spongey. I have bled the brakes several times. They are VT brakes running off a double diaphragm booster and a 1 inch...

Learn from other people before you lay down your hard eaned....speak to your machine shop and take their advice. Depending on where you are in Melb I'd be speaking to Flowcraft or Footscray Engine...

Git it sorted thanks for coming back to me.

Guys I'm trying to fit a power steering pump a clevo in an XD. Originally the car was a 6 so were starting from scratch. I need to know what suits as I've tried four pumps and they foul the outlets...

Thanks Winston, i should have been clearer on the pinstriping. As much as I love what he does I'm only after the original pin stripes for my VB SLE!

Folks I'm after a good heat reflection product to cover the floor in my car under the carpet. The trans is giving off a lot of heat as its a bigger trans than originally fitted and it feels like the...

Hey guys i've also put a long range tank from a VQ Statesman into my VB SLE and now need to wire up the sender to my dash. Which wiring do I use? There is a white plug on the back of the sender with...

I do realise they no longer make pistons that's why I've come out to the forum. My current piston part number is 9571 so if i can't find them I'd like a set of 9352's. I'm trying to stay with ACL as...

Guys, i need two 30th over dished pistons for a Holden 308/355. Mine have been damaged but I do not need a whole set - unless they are at good price. Regards Steve 0488 008 082 Melbourne

G'day guys, I've currently got my engine out of the car for a couple of weeks and want to replace a few nuts and bolts with new ones and try to get a consistant look and finish. I've been to a...

TK, i know this thread is getting long in the tooth but would you be prepared to do the work to my pump if i was to send it to you? I dont have the tools nor the expertise to do the work. If you were...

When you say standard K frame, do you mean that a manual rack should bolt to the k frame i have in the car now which has a power steering rack on it? I've been led to believe the k frames are...

Happy to do that if it needs to be done.