Page 3 of 9 FirstFirst 123456 ... LastLast
Results 31 to 45 of 133
  1. #31
    casual poster
    Join Date
    Mar 2017
    Location
    Qld
    Posts
    134

    Default

    Hopefully there is enough time haha it is a drivable car now with a 308 but has a couple lobes worn off

    iv got all the bits for the conversion just need to finish the donk and hope the pipes fit🤞 2nd hand Castle headers but they have been slightly modified previously doesnít look like it should be a problem if it is Iíll just modify the engine mounts till they do

  2. #32
    casual poster
    Join Date
    Mar 2017
    Location
    Qld
    Posts
    134

    Default

    Bank decided theyíd love for me to go to Summernats so got plenty extra dollars and limited time haha.

    Iíll pay for the entry in the next week, if it doesnít make it at least Iíll have a bigger camping spot,

    Bloke in my car club rough quoted me $1800 for covering seats and making the rear fit around the tubs

    getting excited itís been 2 years since I drove it last time and Iím excited about blazing tyres may do a Madaz event before as a test just in case I look like an idiot haha
    Last edited by 10WHK; 28-10-2018 at 12:31 AM.

  3. #33
    casual poster
    Join Date
    Mar 2017
    Location
    Qld
    Posts
    134

    Default






  4. #34
    casual poster
    Join Date
    Mar 2017
    Location
    Qld
    Posts
    134

    Default


  5. #35
    casual poster
    Join Date
    Mar 2017
    Location
    Qld
    Posts
    134

    Default



    Block had a quick hone, heads are ready to pick up and only a couple pistons left to clean then throw it all back together

  6. #36
    casual poster 1time's Avatar
    Join Date
    Aug 2015
    Location
    Brissy
    Posts
    256

    Default

    Are you leaving the cam bearings?

  7. #37
    casual poster
    Join Date
    Mar 2017
    Location
    Qld
    Posts
    134

    Default

    Yeah they donít look to bad and it prolly wonít last long enough to kill them haha, iv done a big order of bits today hopefully theyíll turn up before the weekend so I can get a bit more excited

    Coil relocation brackets
    Billet tensioner
    More arp bolts
    Some gaskets
    Water pump
    Radiator

  8. #38
    casual poster
    Join Date
    Mar 2017
    Location
    Qld
    Posts
    134

    Default

    Pistons are back in also and it turns over so must be right, ring gaps about .023 out of the packet

  9. #39
    casual poster
    Join Date
    Mar 2017
    Location
    Qld
    Posts
    134

    Default

    Dec 8 is Madaz, fingers crossed skids on mite not have interior sorted but hopefully it’ll be running and blazing tyres

  10. #40
    casual poster 1time's Avatar
    Join Date
    Aug 2015
    Location
    Brissy
    Posts
    256

    Default

    Niiiiice bro. You're killing it

  11. #41
    casual poster
    Join Date
    Mar 2017
    Location
    Qld
    Posts
    134

    Default

    Trying haha works busy as so I gota try and do little bits in between paying jobs and also stop in on my 1 day off, it’s the car event slog that if you don’t do it, it never happens

  12. #42
    Do you ever leave?
    Join Date
    Jan 2008
    Location
    Just outside the A.C.T.
    Posts
    1,642

    Default

    Did you cut into the rail when doing those mini tubs or is it just sanded smooth ? Having a wagon makes it a bit easier..... no rear firewall to contend with !

    I like this build....... a lot !

  13. #43
    casual poster
    Join Date
    Mar 2017
    Location
    Qld
    Posts
    134

    Default

    Yeah mate about an inch and a half, diffs 55mm shorter each side and I wanted to fit commy pursuit rims so they tuck in away from the rear quarters should also fit 295s on 10in rims easy

    youíll have to come have a look and say gday at the Nats next year, Iíll be there even if the cars not my bro has a tidy HZ stato thatíll take its spot if it doesnít make it or my HK prem but Iíll worry about that if it comes to it

  14. #44
    casual poster
    Join Date
    Mar 2017
    Location
    Qld
    Posts
    134

    Default

    Only problem with tubs in the wagon is making the rear seat fit and making it look neat again, hopefully the upholstery bloke in my car club can sort it for less then a house deposit haha

  15. #45
    Do you ever leave?
    Join Date
    Jan 2008
    Location
    Just outside the A.C.T.
    Posts
    1,642

    Default

    Quote Originally Posted by 10WHK View Post
    Yeah mate about an inch and a half, diffs 55mm shorter each side and I wanted to fit commy pursuit rims so they tuck in away from the rear quarters should also fit 295s on 10in rims easy

    you’ll have to come have a look and say gday at the Nats next year, I’ll be there even if the cars not my bro has a tidy HZ stato that’ll take its spot if it doesn’t make it or my HK prem but I’ll worry about that if it comes to it
    Will do, I'm not far out of town and will be hanging around.

Page 3 of 9 FirstFirst 123456 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Those dam burnouts
    By TOAD4.2 in forum Members Lounge
    Replies: 5
    Last Post: 08-07-2013, 09:14 PM
  2. Burnouts are burnouts
    By Petrolhead in forum Members Lounge
    Replies: 39
    Last Post: 29-10-2011, 04:32 AM
  3. Replies: 10
    Last Post: 18-02-2010, 09:09 PM
  4. Us vs Them burnouts.
    By HQforme in forum Images & Videos
    Replies: 0
    Last Post: 09-02-2010, 09:08 PM
  5. Burnouts in an ej?
    By )( E D )( in forum Members Lounge
    Replies: 17
    Last Post: 29-01-2010, 10:24 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •