t350 - Aussie V8 | Holden - Ford

4HUNJYHQ · 19-02-2008, 05:58 PM

hi all, stupid question i know but i cant for the life of me find the hole for my speedo drive, can anyone shed some light?

cheers, andy

76lxhatch · 19-02-2008, 08:09 PM

In the extension housing

COOPHT · 19-02-2008, 08:15 PM

Passengers side rear on the extension housing.

4HUNJYHQ · 19-02-2008, 09:15 PM

sweet, thanks guys, i found something up there, but it threads in, i didnt think the speedo cable threaded in, the one i have seems to press in, ill sort it out in the morning when the weather is a bit less miserable hopefully

COOPHT · 25-02-2008, 01:29 PM

What you’re probably looking at is the speedo gear carrier. It sounds as if you are missing this bit. Is that correct?.
It presses in and has an O ring and small bolt and retaining lug.
Then gear carrier has the boss to screw the Speedo cable too.
Hope that makes sence.
I will get a pic of mine for you.

4HUNJYHQ · 25-02-2008, 01:51 PM

that would be great bryce, we got it all in, made a new retaing lug up from a templeate one of the trans places here made up for me, its all together but still not working properly, a complete shot of it together would be good to see that i have it in right. Mine is an early t350 if thats any help, the later ones have the same speedo drive as a t700 from what i was told last wednesday, and are about twice the size

COOPHT · 27-02-2008, 10:00 PM

This is my Bros T350 in his rod.
Ignore the thing on the end of the gear it’s an electronic Speedo converter.

Is this the pic you need or something else.

4HUNJYHQ · 28-02-2008, 12:20 AM

yep that is the small input into the box like mine, ill have to get under mine with a light and suss it out, i should be able to sort it out from that pic, thanks mate

19-02-2008, 05:58 PM	#1 (permalink)
4HUNJYHQ was 3fitty, now 4hunjy Trade Rating: (0) Join Date: Aug 2005 Location: toowoomba Ride: xf sinbin/ xh falcon ute/ hq premier/ ktm lc4 640 Posts: 446	t350 hi all, stupid question i know but i cant for the life of me find the hole for my speedo drive, can anyone shed some light? cheers, andy

19-02-2008, 08:15 PM	#3 (permalink)
COOPHT Old Cars have soul. Trade Rating: (0) Join Date: May 2006 Location: Allways in the shed. Ride: HJ Tonner. Posts: 668	Passengers side rear on the extension housing. __________________ PROBLEM ? Improvise, Adapt and Overcome

25-02-2008, 01:29 PM	#5 (permalink)
COOPHT Old Cars have soul. Trade Rating: (0) Join Date: May 2006 Location: Allways in the shed. Ride: HJ Tonner. Posts: 668	What you’re probably looking at is the speedo gear carrier. It sounds as if you are missing this bit. Is that correct?. It presses in and has an O ring and small bolt and retaining lug. Then gear carrier has the boss to screw the Speedo cable too. Hope that makes sence. I will get a pic of mine for you. __________________ PROBLEM ? Improvise, Adapt and Overcome

27-02-2008, 10:00 PM	#7 (permalink)
COOPHT Old Cars have soul. Trade Rating: (0) Join Date: May 2006 Location: Allways in the shed. Ride: HJ Tonner. Posts: 668	This is my Bros T350 in his rod. Ignore the thing on the end of the gear it’s an electronic Speedo converter. Is this the pic you need or something else. __________________ PROBLEM ? Improvise, Adapt and Overcome

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

19-02-2008, 08:09 PM	#2 (permalink)
76lxhatch Sure why not? Trade Rating: (0) Join Date: Jan 2007 Location: Nelson NZ Ride: SS Torana Posts: 1,797	In the extension housing

19-02-2008, 09:15 PM	#4 (permalink)
4HUNJYHQ was 3fitty, now 4hunjy Trade Rating: (0) Join Date: Aug 2005 Location: toowoomba Ride: xf sinbin/ xh falcon ute/ hq premier/ ktm lc4 640 Posts: 446	sweet, thanks guys, i found something up there, but it threads in, i didnt think the speedo cable threaded in, the one i have seems to press in, ill sort it out in the morning when the weather is a bit less miserable hopefully

25-02-2008, 01:51 PM	#6 (permalink)
4HUNJYHQ was 3fitty, now 4hunjy Trade Rating: (0) Join Date: Aug 2005 Location: toowoomba Ride: xf sinbin/ xh falcon ute/ hq premier/ ktm lc4 640 Posts: 446	that would be great bryce, we got it all in, made a new retaing lug up from a templeate one of the trans places here made up for me, its all together but still not working properly, a complete shot of it together would be good to see that i have it in right. Mine is an early t350 if thats any help, the later ones have the same speedo drive as a t700 from what i was told last wednesday, and are about twice the size

28-02-2008, 12:20 AM	#8 (permalink)
4HUNJYHQ was 3fitty, now 4hunjy Trade Rating: (0) Join Date: Aug 2005 Location: toowoomba Ride: xf sinbin/ xh falcon ute/ hq premier/ ktm lc4 640 Posts: 446	yep that is the small input into the box like mine, ill have to get under mine with a light and suss it out, i should be able to sort it out from that pic, thanks mate

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Crossmembers - T350 to T700	epitaph	Holden V8's	0	26-06-2007 11:41 AM
T350 in Perth or T350 parts	dnar	For Sale Items	3	24-07-2006 11:13 PM
T350 and T400 gearbox	pimpedhq	Holden V8's	10	23-07-2005 12:08 PM

Google Adverts keep this forum alive
Google Adverts