Hmmmm. Sherlock Homie is on the case, looking for clues.
Looking at the venturi spacing in the pics, I'd say it's a 750, then.
That MAY be a HOLLEY, Russ.
Perhaps it's just been done up with AED stickers on the bowls.
Although, this seems to be using a primary bowl on the secondary side. Notice how the fuel level checking plug is the same height as the primary, instead of slightly lower.
No thread on the opposite side intake on that bowl leads me to the conclusion that it was supplied to AED as a blank and drilled/tapped to suit their application.
Nevertheless, most of the clones buy parts from HOLLEY. That's why I disregarded the HOLLEY casting on the body.
AED, QUICKFUEL, PROFORM, DamBEST. Not counting DEMON, as they use all their own stuff on HOLLEY basic design
Some of them use billet metering plates and baseplates, which can be a downfall in the HOLLEYs. HOLLEY HP series started using these.
LH/350, what are the rest of the numbers on it. I can see some on the metering blocks, but can't quite make out what they are.
__________________
Nothing to see, here
Move along, please
.
|